Mercury & Mariner 95 HP Ignition Parts

Save on stators, switch boxes, triggers, rectifiers, voltage regulators and internal wiring harnesses for Mercury and Mariner 95 HP outboards. Parts manufactured by CDI Electronics meet or exceed OEM specifications.

Scroll down to the bottom for more info.

Prices include shipping in the continental US.

HP Model Year Cyls Serial Switch Box Stator Trigger Rectifier Harness
95 950 Inline 1976-1967 6 1869776-2101742 114-2803
R398-2188 Points N/A 414-2770
95 950 1976-1967 6 2101743-2318585 114-2986
R398-2188 134-3736
95 XR Sport Jet 1995-1997 3 0E141089-0E315900 114-4953

Place an Order

Important Info

The application chart is just a general guide. Always include your engine model and serial numbers to be sure you receive the correct parts. If possible, also include the part number that's on your old part.

Ignition parts are not returnable. If you have any questions about troubleshooting or ordering the correct part, please contact us before ordering to avoid getting stuck with an incorrect part.


CDI stators and switch boxes for Mercury/Mariner outboards and Sport Jets are covered for two years; triggers, coils, rectifiers, voltage regulators and harnesses are covered for one year.

Part numbers that begin with an R are remanufactured by CDI/Rapair and come with a 90-day warranty. Most "R" part numbers require that you send your old part in to be remanufactured.

More CDI Electronics warranty info.

Additional Parts Info

174-8778K1 (9 amp) & 174-9710K1 (16 amp) Stators 
These two stators are identical, except for the battery charging output. If you have a voltage regulator with "5279" in the part number, you can use 174-9710K1. If you only have a rectifier, you'll need to use 174-8778K1, unless you upgrade the rectifier to a CDI #194-5279 voltage regulator.

Battery CD Ignition
Switch box part numbers 114-2986 and 114-4796 both come with new ignition coils, so there's no need to order them separately.

Click here for more Mercury/Mariner outboard parts.

Place an Order