Powerheads for Johnson, Evinrude, OMC/BRP

3 Cylinder OMC Powerheads

Rebuilt powerheads for Johnson and Evinrude 3-cylinder outboards are covered by a one-year limited warranty. Each powerhead comes with a base installation gasket set.

Prices include shipping in the continental US, including the return of your core where applicable.

Scroll down to the bottom for more info.

3 Cylinder Powerheads for Johnson & Evinrude

HP Years Part Number Price Core
50 1995-1998 OM-P3-99-R $1,975 -
60 1986-1988 OM-P3-86-R $1,690 -
60 1989-1990 OM-P3-90-R $1,875 + core $100
60 1991-1992 OM-P3-92-R $1,875 + core $100
60 1993-1998 OM-P3-99-R $1,975 -
60 1999-2001 OM-P3-99A-R $1,975 + core $200
70 1986-1988 OM-P3-88-R $1,670 + core $250
70 1989-1990 OM-P3-90-R $1,875 + core $100
70 1991-1992 OM-P3-92-R $1,875 + core $100
70 1992-1998 OM-P3-99-R $1,975 -
70 1999-2001 OM-P3-99A-R $1,975 + core $200
75 E-TEC 2004-2005 OM-P3-10-R $2,475 + core $200
75 E-TEC 2006-2007 OM-P3-12-R $2,475 + core $200
75 E-TEC 2008-2012 OM-P3-14-R $2,475 + core $200
90 E-TEC 2004-2005 OM-P3-10-R $2,475 + core $200
90 E-TEC 2006-2007 OM-P3-12-R $2,475 + core $200
90 E-TEC 2008-2012 OM-P3-14-R $2,475 + core $200

 

Important Info

Be sure to include your engine model number when placing a powerhead order.

Always follow the correct break-in procedure in your owner's manual when replacing the powerhead.

The water pump should be replaced and the carbs should be rebuilt when replacing a powerhead, since most failures can be traced back to a cooling problem or lean condition.

It's important to identify and correct the problem that caused the powerhead to fail to avoid damaging the replacement and voiding the warranty. Be sure to inspect the entire fuel and cooling systems for problems.

Core Info

The value of your core is based on the condition of the block and crank. You'll receive a core return label for sending your core back--do not return the core without the proper label.

Click here for more Johnson-Evinrude-OMC/BRP parts.

Place an Order