Mercury & Mariner 75 HP Ignition Parts

Save on stators, switch boxes, triggers, rectifiers, voltage regulators and internal wiring harnesses for Mercury and Mariner 75 HP outboards. Parts manufactured by CDI Electronics meet or exceed OEM specifications.

Scroll down to the bottom for more info.

Prices include shipping in the continental US.

HP Model Year Cyls Serial Switch Box Stator Trigger Rectifier Harness
75 -- 1984-1986 4 6432901-0C221499 114-5772
$219.00
174-5454K1
$185.00
134-6454
(Info)
$125.00
154-6770
$49.95
414-6233A2
$175.00
75 9 Amp 1987-1993 3 0C221500-0D283221 114-7778
$169.95
174-8778K1
(Info)
$245.00
134-9021-3
$115.00
154-6770
$49.95
414-1591
$68.95
75 16 Amp 1987-1993 3 0A996142-0D283221 114-7778
$169.95
174-9710K1
(Info)
$245.00
134-9021-3
$115.00
194-5279
$159.00
414-1591
$68.95
75 Electric Start 1994-1996 3 0D283222-0G437999 114-4953
$249.00
174-9710K1
(Info)
$245.00
134-9021-3
$115.00
194-5279
$159.00
414-1591
$68.95
75 Manual Start 1994-1996 3 0D283222-0G437999 114-4953
$249.00
R398-9873A33 134-9021-3
$115.00
N/A N/A
75 2-Stroke 1996-2006 3 0G438000-1B000001 114-7509
$95.00
174-2075K2
(Info)
$215.00
134-4512-3
$89.95
194-5279
$159.00
414-0043
$99.95

Place an Order

Important Info

The application chart is just a general guide. Always include your engine model and serial numbers to be sure you receive the correct parts. If possible, also include the part number that's on your old part.

Ignition parts are not returnable. If you have any questions about troubleshooting or ordering the correct part, please contact us before ordering to avoid getting stuck with an incorrect part.

Warranty

CDI stators and switch boxes for Mercury/Mariner outboards and Sport Jets are covered for two years; triggers, coils, rectifiers, voltage regulators and harnesses are covered for one year.

Part numbers that begin with an R are remanufactured by CDI/Rapair and come with a 90-day warranty. Most "R" part numbers require that you send your old part in to be remanufactured.

More CDI Electronics warranty info.

Additional Parts Info

174-8778K1 (9 amp) & 174-9710K1 (16 amp) Stators 
These two stators are identical, except for the battery charging output. If you have a voltage regulator with "5279" in the part number, you can use 174-9710K1. If you only have a rectifier, you'll need to use 174-8778K1, unless you upgrade the rectifier to a CDI #194-5279 voltage regulator.

174-2075K1 (9 amp) & 174-2075K2 (16 amp) Stators 
These two stators are identical, except for the battery charging output. If you have a voltage regulator with "5279" in the part number, you can use 174-2075K2. If you only have a regular rectifier, you'll need to use 174-2075K1, unless you upgrade the rectifier to a CDI #194-5279 voltage regulator.
Note: These stators should only be used with CDM modules. If you have a switch box, use 174-8778K1 or 174-9710K1 instead.

134-6452 and 134-6454 Triggers 
Before ordering, be sure to check your linkage arm to see if it's straight or has a 90 degree hook in it, as shown in the picture. If it's straight, order 134-6452. If it does have a hook in it, order 134-6454. Note that the two parts are not interchangeable.

Mercury Triggers

Click here for more Mercury/Mariner outboard parts.

Place an Order